To Control V3D or Zion Via a DMX lighting desk follow these instructions ( This is Not applicable to Millennium Or V3DLite).
1… Right click on the black preview screen to bring up the config menu, go to properties and select your DMX channel. 
After left clicking properties the window below will appear. 
Place a tick in the DMX controller box.
Then select the DMX channel you want to use.
Next Click OK.
If you wish to view the input properties for the DMX, right click on the black preview screen again and navigate to the DMX Input Icon and left click, the window below will appear. 
Select the values that you wish to use or use the default values supplied with V3D/Zion.
If You requested DMX control, you will have been supplied with a 9 way, D type connector, this plugs into the connector next to the TTL DB connector on the V3D/Zion Pci card or USB unit.
| 
