To access the configuration properties place the mouse over the black preview screen and right click the menu below will appear.

Go to Properties at the bottom of the list and left click the screen below will appear.

To Configure your Laser projector and Video projector follow these instructions.

Laser Projector Output (Available in all software except for V3D Lite)

1: Place a tick in the Laser On Checkbox.

2: Under Devices click on the down arrow then select Device 0.

Video (This option is only available in V3D and V3DLite)

1: Place a tick in the Video On Checkbox.

2: Under Adapters click on the down arrow and select the output device that you wish to use for your Video output. Please note that you cannot use the Primary output device that your desktop uses, if you have Extended desktop enabled for your second video output device, V3D will not be able to use this device.

3: Select the resolution for your output device, the lower the resolution the brighter the effects produced by your video projector.

When you have selected the devices that you wish to use click OK, you are now ready to project your images.

The other settings in the Configuration Properties are listed in the Configuration Tab of this document.

Home | Install/Overview | Opening Screen | Config Projectors | Configuration | Global Adjust | Adjust Show | Run Show | Record Show | Build Libary | Image Editor | Effects Editor | Optimize/Scale | Autotrace | AVI Trace | Make Scene | Beam Editor | Beam Table | Pattern Generator | Quick Text | Clock Generator | Define Color | Colorize | Keyboard Summary | Keyboard Live Play | Adjust Channel | Add Channel | Adjust Scene | Channel Properties | Scene Properties | Scene Attributes | Laser Tab | Autorun | DMX Input | DMX Output | TTL Input | TTL Output | Pinout Information

Questions or problems regarding this help should be directed to [laserelectronics@btconnect.com].
Copyright © 2008 [Laser Electronics Ltd]. All rights reserved.
Last modified: 01/04/08.